What satellite internet?
Satellite Internet services are used in locations where terrestrial Internet access is not available and in locations which move frequently. Internet access via satellite is available worldwide, including vessels at sea and mobile land vehicles. There are three types of satellite Internet service.
One-way multicast
One-way multicast satellite Internet systems are used for Internet Protocol (IP) multicast-based data, audio and video distribution. In the U.S., a Federal Communications Commission (FCC) license is required only for the uplink station and no license is required for users. Note that most Internet protocols will not work correctly over one-way access, since they require a return channel. However, Internet content such as web pages can still be distributed over a one-way system by "pushing" them out to local storage at end user sites, though full interactivity is not possible. This is much like TV or radio content which offers little user interface.
Hardware Components
Similar to one-way terrestrial return, satellite Internet access may include interfaces to the public switched telephone network for squawk box applications. An Internet connection is not required, but many applications include an File Transfer Protocol (FTP) server to queue data for broadcast.
One-way with terrestrial return
One-way terrestrial return satellite Internet systems are used with traditional dial-up access to the Internet, with outbound data traveling through a telephone modem, but downloads sent via satellite at a speed near that of broadband Internet access. In the U.S., an FCC license is required for the uplink station only; no license is required for the users.
Another type of 1-way satellite internet system involves the use of General Packet Radio Service (GPRS) for the back-channel. By utilizing a connection that is offered in standard GPRS or EDGE, the upload volume is very low and since this service is not per-time charged, but charged by volume uploaded, users are able to surf and download in broadband speeds. Another view of using GPRS as return would be the mobility when the service is provided by a satellite that transmits in the field of 50 to 53 dBW. Using a 33 cm wide satellite dish, a notebook and a normal GPRS equipped GSM phone, users can get mobile satellite broadband.
Hardware components
The transmitting station (also called "teleport", "head end", "uplink facility", or "hub") has two components:
* Internet connection: The ISP's routers connect to proxy servers which can enforce quality of service (QoS) bandwidth limits and guarantees for user traffic. These are then connected to a DVB encapsulator which is then connected to a DVB-S modem. The radio frequency (RF) signal from the DVB-S modem is connected to an up converter which is connected via feed line to the outdoor unit.
* Satellite uplink: The block upconverter (BUC) and optional low-noise block converter (LNB), which may use a waveguide to connect to the optional orthomode transducer (OMT) which is bolted to the feed horn which is connected by metal supports to the satellite dish and mount.
At the remote location (Earth station) the setup consists of:
Outdoor unit
- Satellite dish with mount
- Feedhorn
- Universal LNB, for Ku band.
- Feed line
- DVB-S Peripheral Component Interconnect (PCI) card internal to a computer
- DVB external modem where an 8P8C (RJ-45) Ethernet port or a Universal Serial Bus (USB) port connects the modem to the computer
More Information and Credit: Wikipedia Satellite Internet